SignUp | Sign In
Abadgaran Construction Chemicals
Reaserch and Development
Factory at a Glance
Organizational Structure
Code Of Ethics
Mission
Achivements
Opportunities
Representative Opportunities
Headquarter
Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address info@abadgarangroup.com

See On Map
Abadgaran Group Office
Factory
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

See On Map
Abadgaran Group Factory
Customer Satisfaction Feedback Form
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.
phone
instagram
telegram
aparat
Home
Product Groups
Curing
ABA CURE

ABA CURE

WATER-BASED CURING COMPOUND
DESCRIPTION

ABA CURE is a water-based curing compound which when applied to new concrete
substrates after the final finishing operations are completed to form a film that retains mix water allowing normal hydration.

This film remains as a protective surface sealing treatment that greatly reduces dusting and increases stain resistance of the cured concrete.
ABA CURE meets the requirements of the following standards:
ASTM C309, ASTM C156
BS 7542
 

ABA CURE

APPLICATION INSTRUCTIONS
1- Application should be made immediately following the final finishing operations as soon as
the surface “sheen” of moisture has disappeared and slab can support the weight of an applicator.
In case of delay, thoroughly dampen the surface with clean water then applying ABA CURE.
2- Ensure that there is no free water on the surface before applying.
3- In case of hot weather and Mat concreting, the required thickness is achieved by applying 2 layers. Leave the first layer for 30-60 minutes before applying the second layer;
4- ABA CURE could be mixed with clean water (mixing ratio: ABA CURE:Water = 1:0.3-0.5 /wt) in temperate weathers;
5- Apply by spray, brush, long nap roller, or lamb's wool applicator. For best results, we recommend a low-pressure garden-type sprayer with neoprene hoses. Apply uniformly to form a continuous film.
6- Apply ABA CURE at a rate of 150-200 grams per 1.0 m2.
7- Avoid any ponding on the concrete surface.

Note:
-Prior to drying; equipment can be cleaned with soap and water.
-After applying, Protects surfaces from freezing.

ADVANTAGES

  • Forming a durable film.
  • Reduces early evaporation.
  • Aids concrete to attain maximum hydration, strength, durability and surface hardness.
  • Shrinkage with associated hairline cracking and crazing greatly reduced in vertical and horizontal applications.
  • Reduces permeability.
  • Excellent moisture retention produces a durable concrete surface through optimum curing.
  • Increases stain resistance and cleanability by sealing the surface pores.
  • Extremely economical and easily applied.

APPLICATION

  • For application on vertical, horizontal, smooth or textured, concrete substrates.
  • Concreting in windy areas.
  • Concreting in areas where concrete is exposed to intense sunlight.
  • Suitable for curing and sealing plain concrete and concrete surfaces treated with nonmetallic, dry shake floor hardeners and topping courses.
  • Suitable for interior or exterior concrete floors, pavements, sidewalks and structures.
  • Applications where solvent-based products cannot be used because of health and safety reasons.
  • Applications to existing concrete surfaces as economical, water clear, protective sealing treatments.

Physical state

 Liquid

Specific gravity

 1.4±0.1 g/cm3

Color

 Light gray (Silver)

pH

 12.0±1.0

Chloride content

 Nil

PACKAGING
30 kg containers.


STORAGE

  • Shelf life: 1 year in the original package.
  • Storage condition: should be protected from direct sunlight and frost. Keep container in the.
  • temperature range between +10°C and +30°C.
     

HEALTH AND SAFETY
This product does not contain any hazardous substance to human health and the environment.
However, it should not be swallowed and contacted with skin and eyes.
Rubber gloves, boots and goggles should be used during application. Accidental splashes
on the skin should be washed with soap and water and any contaminated clothing removed.
Contact with eyes should be avoided and if any accidental contamination does occur they
should be washed with copious amounts of water and medical attention sought.
ABA CURE is not flammable.
For further information refer to the material safety data sheet. MSDS is available at ABADGARAN website.

ABA CURE
AQUAFORM-230
MOULD OIL-O400

ABA CURE Data Sheet


WE DEVELOP CHEMISTRY