ABA READYFIX-W

• Good adhesive bond strength
• Good workability and easy to apply
• Applicable for layer thicknesses of up to 3 mm
• High-viscous and slip-resistant

• Stir well before use. Use a trowel or straight edge to spread ABA READYFIX-W onto the substrate. Then comb the adhesive evenly using a notched trowel. Place the tiles within be open time and press firmly to ensure full bedding contact by twisting action. Leave a tile joint spacing around 2 mm. do not apply adhesive over movement joints. Remove excess adhesive with a clean damp cloth or sponge before drying. Allow at least 24 hours curing before joint grouting works.

• Base :    Acrylate base dispersion adhesive
• Density :    Approx. 1.8 g/cm3
• Application temperature :    +5°C to +35°C
• Open time :   Approx. 20 minutes
• Adjustability time :   Approx. 45 minutes
• Fully cured :    7 days
• Tensile adhesive strength :   ≥ 0.5 N/mm2
• Amount required (kg/m2) :    2.5-4

PACKAGING
12.5kgs plastic bag
STORAGE &SHELFLIFE
Approx. 12 months if stored in a tightly sealed container, in cool and dry conditions. Use product in opened containers as soon as possible.
TECHNICAL SERVICE
The ABADGARAN INTERNATIONAL GROUP Technical Department is available to assist you in the correct use of our products and its resources are at your disposal entirely without obligation.

• ABA READYFIX-W is alkaline and may cause irritation, wear gloves and goggles during application. If in contact with skin, wash thoroughly with soap and water. If in contact with eyes or mucous membrane, flush immediately with plenty of water and see medical attention without delay. Use with adequate ventilation. MSDS is available at ABADGARAN website.