S.P.A.PLAST-404 S.P.A.PLAST-404 | Concrete Admixtures

Home

S.P.A.PLAST-404

HIGH RANGE WATER REDUCER / SUPER PLASTICIZER AND RETARDING ADMIXTURE
DESCRIPTION
S.P.A.PLAST-404 is a high range water-reducer and super plasticizing admixture with controlled retardation.

It meets the requirements of the following standards:
ASTM C494/C494 M TYPE G, EN 934 and ISIRI 2930

Method

DOSAGE
The optimum dosage of S.P.A.PLAST-404 can be determined by trials in the site. Depending on concrete mix design (sizes and types of aggregates, cement content, water/cement ratio,
ambient temperature and concreting conditions), a dosage of between 0.45 and 1.0 percent by weight of cement or cementitious material is recommended.
For use with other range of dosage, contact ABADGARAN GROUP Technical Services Department.

DIRECTION OF USE
1-S.P.A.PLAST-404 could be added to a part of concrete mixing water then added to the concrete mix.
2- S.P.A.PLAST-404 could be added to the concrete mix during the mixing cycle at the same
time as the water or the aggregate or it could be added to ready-mix concrete before placing concrete.
3- Admixtures must be weighed carefully.

Properties

ADVANTAGES

Reduces water-cement ratio up to 20%
Excellent workability and workability retention of concrete
Excellent pumpability of concrete
It can be used with all types of Portland cement
Improves concrete consistency
Prevents creep and shrinkage of concrete
Considerably reduces permeability
Increases the compressive strength of concrete

Application

APPLICATION

Enables production and transportation of concrete in normal weather conditions
Mass concrete
Slabs, foundations, columns, shear and retaining walls, deck bridges, etc.

Physical and Chemical Properties

Specific gravity	1.13±0.05 g/cm³
Physical state	Liquid
Color	Dark brown
Chloride Content	Nil to EN 934-2

Considerations

STORAGE

Shelf life: 1 year in the original package.
Storage condition: Should be protected from direct sunlight and frost. Keep container in the temperature range between +10°C and +30°C.
Packing: 22 kg container or 1000 kg tank.

Protection and Safty

HEALTH AND SAFETY
This product does not contain any substances hazardous to human health and the environment.
However, it should not be swallowed and contact with skin and eyes. In case of contact with
eyes, rinse immediately with plenty of water. S.P.A.PLAST-404 is not flammable.

For further information refer to the material safety data sheet. MSDS is available at ABADGARAN GROUP website.

Other Products

POWER PLAST–RM

E.M.ANTIFREEZE-C

MERQUA

S.P.A.PLAST–R

POWER GEL

MICRO GEL

A.C.P-F

A.C.P

POWER PLAST–ES

E.M.GROUT-500