ABAHARD PH-215

• Excellent adhesion to metal and concrete
• Suitable pot-life at both ambient and low temperatures
• Long pot life under water
• Moisture & low temperature tolerant during cure
• Good resistance to chemicals, salt water and superior corrosion resistance

FIELD OF APPLICATION

• Under-water epoxy coating and putty
• Industrial maintenance, marine and pipe coatings
• Pipe and tank linings

SPECIFICATION

• Appearance        Visual    Reddish brown liquid
• Color     ASTM D1544-04      17 G
• Viscosity  @ 25°C         ASTM D2196-05        20000-50000 cP
• Gel time           -        65-90 min
• Non – volatile    -      100%

TYPICAL PROPERTIES

• Amine value    DIN 16945    300-350 mgKOH/g
• AHEW        130
• Mixing ratio
• with Epon 828
• (EEW = 190 g/eq)    -    100:68
• Glass transition temperature    DIN 11357    50°C

PACKAGING

The material is packed & delivered in 220 lit drums.

STORAGE & SHELFLIFE

The shelf life is 12 months if unopened, stored free from frost, moisture and direct sunlight.

HEALTH & SAFETY

This product is Flammable. Keep away from heat and open flame .Keep container closed .Use with adequate ventilation. Avoid prolonged and repeated contact with skin. If used in confined areas, observe the following precautions to prevent hazards of fire or explosion or damage to the health:

1-Circulate adequate fresh air continuously during application and drying.

2-Use fresh air masks and explosion proof equipment.

3- Prohibit all flames, sparks, welding and smoking.

MSDS is available at ABADGARAN website.

TECHNICAL SERVICE

The ABADGARAN INTERNATIONAL GROUP Technical Department is available to assist you in the correct use of our products and its resources are at your disposal entirely without obligation.