SignUp | Sign In
Abadgaran Construction Chemicals
Reaserch and Development
Factory at a Glance
Organizational Structure
Code Of Ethics
Mission
Achivements
Opportunities
Representative Opportunities
Headquarter
Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address info@abadgarangroup.com

See On Map
Abadgaran Group Office
Factory
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

See On Map
Abadgaran Group Factory
Customer Satisfaction Feedback Form
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.
phone
instagram
telegram
aparat
Home
Product Groups
New Chemical Products
ABAHARD 2100FC

ABAHARD 2100FC

FAST-SETTING PHENALKAMINE CURING AGENT

DESCRIPTION

ABAHARD 2100FC is a modified Phenalkamine based fast curing agent. This curing agent is designed to cure broad band of epoxy resins especially at low temperatures, high humid conditions and even under water. It can be used with solvent free and solvent based epoxy resins. This curing agent is used in anti-corrosive applications especially in marine and industrial environment.

 

Please refer to the product technical information sheet.

  • Fast curing and low viscosity property.
  • Excellent adhesion to metal and concrete.
  • Short pot-life at both ambient and low temperatures.
  • Appropriate pot life under water.
  • Moisture & low temperature tolerant during cure.
  • Good resistance to chemicals, salt water and superior corrosion resistance.

  • Under-water epoxy coating and putty.
  • Industrial maintenance, marine and pipe coatings.
  • Pipe and tank linings.

SPECIFICATION

Appearance

Visual

Reddish brown liquid

Color

ASTM D1544-04

17 G

Viscosity @ 25°C

ASTM D2196-05

2000-4000 cP

Pot life

-

~20 min

Non – volatile

-

100%
 

TYPICAL PROPERTIES

Amine value

DIN 16945

290-320 mg KOH/g

AHEW

-

120-130

Mixing ratio

with Epon 828

(EEW = 190 g/eq)

-

100:60

Glass transition temperature

DIN 11357

50 °C

 

 
 

Curing properties: Dry environment

Thin film set time @ 25°C

ASTM D5895

4 hrs

Full cure @ 25°C

ASTM D5895

1 week

Thin film set time @ 5°C

ASTM D5895

10 hrs

Full cure @ 5°C

ASTM D5895

2 weeks

 

 

 

 

 

 

 

Curing properties: Under water

Thin film set time @ 25°C

ASTM D5895

10 hrs

Full cure @ 25°C

ASTM D5895

2 weeks

 

 

 

.

 

PACKAGING

The material is packed & delivered in 200 kg drums.

 

STORAGE & SHELFLIFE

The shelf life is 12 months if unopened, stored free from frost, moisture and direct sunlight.

Keep container in the temperature range between +10°C and +30°C.

 

This product is Flammable. Keep away from heat and open flame. Keep container closed. Use with adequate ventilation. Avoid prolonged and repeated contact with skin. If used in confined areas, observe the following precautions to prevent hazards of fire or explosion or damage to the health:

  1. Circulate adequate fresh air continuously during application and drying.
  2. Use fresh air masks and explosion proof equipment.
  3. Prohibit all flames, sparks, welding and smoking.

MSDS is available at ABADGARAN website.

ABAHARD PH-215
PARSICO-CP & HP
DASYNEP FC-20
ABAHARD 2100L
SOLVITOR ACI-301
AQUATOR ACI-301
ABAHARD 2100FC

ABAHARD 2100FC Data Sheet


WE DEVELOP CHEMISTRY