SignUp | Sign In
Abadgaran Construction Chemicals
Reaserch and Development
Factory at a Glance
Organizational Structure
Code Of Ethics
Mission
Achivements
Opportunities
Representative Opportunities
Headquarter
Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address info@abadgarangroup.com

See On Map
Abadgaran Group Office
Factory
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

See On Map
Abadgaran Group Factory
Customer Satisfaction Feedback Form
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.
phone
instagram
telegram
aparat
Home
Product Groups
Concrete Admixtures
POWER GEL

POWER GEL

PC MODIFIED SILICA FUME GEL

POWER GEL improves the rheological properties of concrete. It is based on a highly pozzolanic mineral material which significantly reduces water absorption and increases the compressive strength and makes concrete impermeable. High range water reduction and workability retention are special properties of POWER GEL.

POWER GEL comprises the following chemicals:

  1. Silica fume.
  2. New generation super plasticizer based on modified polycarboxylic (PC) polymers.

This advanced-technology product meets the requirements of the following standards:

ASTM C1202

BS EN 12390-8, BS 1881-122

POWER GEL

DOSAGE

The optimum dosage of POWER GEL can be determined by trials in the site. Depending on concrete mix design (concrete type, workability, compressive strength, sizes and types of aggregates, cement content, water/cement ratio, ambient temperature and concreting conditions), a dosage of between 1.0 and 3.0 percent by weight of cement is recommended.

For use with other range of dosage, contact ABADGARAN Technical Services Department.

Note: please contact our engineering office in case of simultaneously use of more than one admixture.

 

DIRECTION OF USE

POWER GEL can be added to concrete in two ways:

1-POWER GEL could be added to ready-mix concrete before placing concrete.

2-POWER GEL could be added to a part or whole of concrete mixing water then added to the concrete mix.

ADVANTAGES

  • Reduces water-cement ratio.
  • Reduces cement content in concrete, at least 20 percent.
  • Increases workability and workability retention of concrete.
  • Increases flexural, tensile and compressive strength of concrete.
  • Achievement of early compressive strength of concrete.
  • Improves pumpability of concrete and reducing depreciation of concreting Equipments.
  • Improves concrete consistency.
  • Enables economies in mix designs to be achieved when special conditions such as chemicals attack, dynamic load, etc.
  • Considerably reduces permeability.
  • Increases durability of concrete.
  • Reduce damages caused by lack of correct curing method.
  • Increases the abrasion resistance of concrete.
  • Reduce the risk of cracks in concrete.

APPLICATION

  • Produces High Strength Concrete (HSC) in special conditions (high dynamic loads).
  • Produces non-osmosis concrete for the regions exposed to chemicals attack.
  • Reinforced  and non-reinforced concrete.
  • Dams, water and wastewater treatment, bridges, channels, etc.
  • Hot weather concreting.
  • Produces resistant concrete against explosion and fire.

 

Physical state

 Slurry

Specific gravity

 1.23+ 0.05 g/cm3

Color

 Dark gray 

STORAGE

  • Shelf life: 1 year in the original package.
  • Storage condition: should be protected from direct sunlight and frost. Keep pail in the temperature range between +10°C and +30°C.
  • Packing: 24 kg container.

HEALTH AND SAFETY

This product does not contain any substances hazardous to human health and the environment. However, it should not be swallowed and contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water. POWER GEL is not flammable.

For further information refer to the material safety data sheet. MSDS is available at ABADGARAN website.

POWER PLAST–RM
E.M.ANTIFREEZE-C
MERQUA
S.P.A.PLAST–R
POWER GEL
MICRO GEL
A.C.P-F
A.C.P
POWER PLAST–ES
E.M.GROUT-500
See More...

POWER GEL Data Sheet


WE DEVELOP CHEMISTRY