آبادگران | افزودنی بتن ، گروت ، کفپوش اپوکسی ،مقاوم سازی ،...

INTELLIGENT SELF-CURING PC MODIFIED SILICA FUME GEL

MS-5-iSC is an advanced additive formulated using Nano-hydrophilic polymer technology embedded within a microsilica gel matrix. It is designed to enable intelligent Self-Curing (iSC) by absorbing and retaining free water within its porous structure, thereby supplying the moisture needed to sustain cement hydration. This internal curing mechanism effectively minimizes early-age drying shrinkage and reduces the risk of cracking caused by premature water evaporation.

MS-5-iSC improves the rheological properties of concrete. It is based on a highly pozzolanic mineral admixture that reduces water absorption and increases the compressive strength and makes concrete impermeable. Workability retention is special properties of MS-5-iSC.

This advanced-technology product can be controlled using the following standards:

ASTM C1202

BS EN 12390-8, BS 1881-122

Method

DOSAGE

The optimum dosage of MS-5-iSC can be determined by trials in the site. Depending on concrete mix design (concrete type, workability, compressive strength, sizes and types of aggregates, cement content, water/cement ratio, ambient temperature and concreting conditions), a dosage of between 3.0 and 10.0 percent by weight of cement is recommended.

For use with other range of dosage, contact ABADGARAN Technical Services Department.

Note: please contact our engineering office in case of simultaneously use of more than one additive.

DIRECTION OF USE

MS-5-iSC can be added to concrete in two ways:

1- MS-5-iSC could be added to ready-mix concrete before placing concrete.

2- MS-5-iSC could be added to a part or whole of concrete mixing water then added to the concrete mix.

Properties

Enables internal curing by storing and gradually releasing water required for cement hydration
Reduces surface water evaporation in hot, dry, or windy conditions
Reduces water-cement ratio
Reduces cement content in concrete
Increases workability and workability retention of concrete
Increases flexural, tensile and compressive strength of concrete
Achieve to early compressive strength of concrete
Improves pumpability of concrete and reducing depreciation of concreting Equipments
Improves concrete consistency
Enables economies in mix designs to be achieved when special conditions such as chemicals attack, dynamic load, etc.
Increases durability of concrete
Increases the abrasion resistance of concrete
Reduce the risk of cracks in concrete

Application

Concrete production and transportation in hot, cold, or windy climates
Concrete for massive structures such as dams, water treatment plants, water channels, and bridges
Produces High Strength Concrete (HSC) in special conditions (high dynamic loads)
Produces non-osmosis concrete for the regions exposed to chemicals attack
Reinforced and non-reinforced concrete
Dams, water and wastewater treatment, bridges, channels, etc.

Physical and Chemical Properties

Physical state: Slurry
Color: Grey
Specific gravity: 1.26 ± 0.05 g/cm³

Considerations

Shelf life: 1 year in the original package.
Storage condition: should be protected from direct sunlight and frost. Keep container in the temperature range between +10 °C and +30 °C.
Packing: 24 kg container

Protection and Safty

This product does not contain any substances hazardous to human health and the environment. However, it should not be swallowed or allowed to be in contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water. For further information, refer to the material safety data sheet.
MS-5-iSC is not flammable. MSDS is available at ABADGARAN website.

رتبه بندی

نام

ایمیل

عنوان نظر

MS-5-iSC

Online Shopping Guide

QuickAccess