E.M.COAT-90

APPLICATION

The application using brush or roller requires laying the material onto the surface, avoiding brushing out, to achieve the required film thickness per coat. It is recommended that two coats should be applied at a rate of 2-5 m² per liter depending on the degree of protection required. 

ADVANTAGES

• Resists chemical attack by chloride and sulphate ions.
• Economical.
• Easy to apply.
• Cold applied.
• Contains no solvent, no health hazard.

FIELD OF APPLICATION

• General waterproofing and damp proofing for concrete and masonry.
• Protection to a variety of buried structures such as concrete foundations and retaining walls.
• Provides a vapour barrier for cold storage rooms, etc.

PACKAGING

25 kg plastic pail.

STORAGE & SHELFLIFE

The shelf life is 12 months if unopened, stored free from frost, moisture and direct sunlight.

HEALTH & SAFETY

E.M.COAT-90 contains bituminous material. Therefore, as with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs. When applying gloves & goggles should be worn. Wash off splashes to skin with water. If in eyes wash out with plenty of clean water and seek medical attention. Reseal containers after use. Use in well ventilated areas and avoid inhalation. E.M.COAT-90 is non-flammable. MSDS is available at ABADGARAN website.